- Ordered
- Marmoleum flooring
- Ordered and received
- Hot water expansion tank
- Small grab handle
- Fire extinguishers
- CO/Smoke detector
- Indoor/outdoor thermal weather station
- Started designing calorifier cabinet and refrigerator support
- Started designing shower area divider
- Applied first 2 coats of urethane to passenger side table
- Paint stripped and cleaned candidate donor entry ladder
- Reviewed geometry of entry ladder options
- Started fabrication of candidate entry ladder
- Fit checked candidate entry ladder
- Fabricated candidate entry ladder
- Final assembled candidate entry later
- Test fit candidate entry ladder
- Final coated urethane on passenger side table
- Purchased material for shower area divider
- Ordered
- Caframo Sirocco II gimbal fan
- Ground shore power electrical components
- Laid out shower area divider on 3/4″ plywood
- Rough cut shower area divider
- Test fit shower area divider with passenger side table
- Trimmed shower area divider
- Rough cut FRP panel for shower area divider
- Prepped and bonded FRP panel to shower area divider
- Designed and ordered switch panel from Front Panel Express
Ordered and received hot water expansion tank
Anti-return valve for calorifier
Ordered and received small grab handle
Ordered and received CO-smoke detector
Ordered and received indoor-outdoor thermal weather station
Started designing calorifier cabinet and refrigerator support
Dometic CFX-40W refrigerator
Fabricated spacer washers for ladder upper bracket
Fabricated spacer washers for ladder upper bracket
Fabricated spacer washers for ladder upper bracket
Fabricated spacer washers for ladder upper bracket
Fabricated and installed ladder upper bracket and top step
Fabricated and installed ladder upper bracket and top step
Fabricated upper and lower ladder caps
Fabricated upper and lower ladder caps
Fixtured and welded ladder subframe mount
Fixtured and welded ladder subframe mount
Fixtured and welded ladder subframe mount
Ladder components prior to final assembly
Drilled ball detent pin holes in ladder mount
Drilled ball detent pin holes in ladder mount
Fit checked candidate entry ladder
Fabricated and installed wheels to allow ladder to move with sway of truck
Fabricated and installed wheels to allow ladder to move with sway of truck
Finished entry ladder
Laid out shower area divider on plywood
Final cut shower area divider
Rough cut FRP panel for shower area divider
Rough cut FRP panel for shower area divider
Prepped and bonded FRP panel to shower area divider using 2 part urethane
Prepped and bonded FRP panel to shower area divider using 2 part urethane
Applied first 2 coats of urethane to passenger side table
Test fit passenger side table
Test fit shower area divider with passenger side table
Designed and ordered switch panel from Front Panel Express
Wabi-sabi Overland 