- Prepped, tacked, and welded on rear tire mount frame:
- Marker light mounts
- Upper driver side grab handle
- Sand ladder mount studs
- Tire mount plate assembly
- Tire lift strap clearance slot
- Ladder mount tabs
- Final welded all tire mount frame structural joints
- Welded sand ladder hold down nuts
- Sandblasted, primed, and painted sand ladder hold down nuts
- Final match drilled ladder to rear steel mount frame
- Fabricated locking tab for spare tire
- Ordered flooring samples
- Ordered ARB awning
- Ordered assorted electrical components and hardware for rear tire mount
- Machined, sand blasted, primed, and painted tire locking plate
- Welded tire locking tab to tire mount
- Drilled solar wire passthrough holes in rear frame
- Machined steel solar wire passthrough tube
- Drilled, prepped, and welded in steel passthrough tube in upper frame beam
- Received flooring smaples
- Machined and welded to rear frame marker light wire guide mount tabs
- Received ARB awning
- Received from McMaster-Carr:
- 4-gauge welding wire (for solar panels)
- 3M VHB to mount solar panels
- Assorted hardware
- Aluminum tube for forward marker light mounts
- Aluminum angle for mounting solar panels
- Solar panel wire guide tube
- Started ordering process for (3) lithium BattleBorn 100 Amp-Hr 10012 batteries
- Machined nylon spacer sleeves for sand ladder mount
- Machined aluminum sand ladder retaining caps
- Test fit sand ladders on rear frame
- Drilled mounting holes for wire support adel clamps
- Cut aluminum solar wire guard tube
- Prepped, masked, primed, and painted rear frame
- Started solar panel mounting plan
- Reviewed door installation instructions
- Started prepping interior cabinets for painting
- Started fabricating forward marker light mount
- Final sealed rear habitat wall to extrusion joints with Korapop 225
- Installed door in habitat
Fixturing and Welding Upper Driver Side Grab Handle
Fixturing and Welding Upper Driver Side Grab Handle
Machined Marker Light Wire Guide Mount Tabs
Final Match Drilled Ladder to Rear Mount Frame
Final Match Drilled Ladder to Rear Mount Frame
Fitting and Welding Lower Sand Ladder Stud
Fitting and Welding Lower Sand Ladder Stud
Fitting and Welding Lower Sand Ladder Stud
Fitting and Welding Upper Sand Ladder Stud
Fitting and Welding Upper Sand Ladder Stud
Sandblasted Sand Ladder Hold Down Nuts
Painted Sand Ladder Hold Down Nuts
Sand Ladder Hold Down Nut
Machined Nylon Spacer Sleeves for Sand Ladder Mount
Machined Nylon Spacer Sleeves for Sand Ladder Mount
Machined Nylon Spacer Sleeves for Sand Ladder Mount
Machined Nylon Spacer Sleeves for Sand Ladder Mount
Machined Sand Ladder Spacer Retainer Nut
Machined Nylon Spacer Sleeves for Sand Ladder Mount
Machined Aluminum Sand Ladder Retaining Caps
Machined Aluminum Sand Ladder Retaining Caps
Machined Aluminum Sand Ladder Retaining Caps
Machined Aluminum Sand Ladder Retaining Caps
Test Fitting Sand Ladder Mount and Lock Assembly
Machined Tire Locking Plate
Machined Tire Locking Plate
Machined Tire Locking Plate
Machined Tire Locking Plate
Painted Tire Locking Plate
Machining, Fitting, and Welding Steel Solar Wire Passthrough Tube
Machining, Fitting, and Welding Steel Solar Wire Passthrough Tube
Machining, Fitting, and Welding Steel Solar Wire Passthrough Tube
Machining, Fitting, and Welding Steel Solar Wire Passthrough Tube
Machining, Fitting, and Welding Steel Solar Wire Passthrough Tube
Received 4-Gauge Welding Wire for Solar Panels
Received Aluminum for Mounting
Received ARB Awning
Received Flooring Samples
Primed Rear Frame
Painted Rear Frame
Started Prepping Interior Cabinets for Painting
Started Fabricating Forward Marker Light Mount
Prepping to Final Seal Rear Habitat Wall to Extrusion Joints with Korapop 225
Final Sealed Rear Habitat Wall to Extrusion Joints with Korapop 225
Prep Work for Habitat Door Installation
Prep Work for Installing Habitat Door
Tern Overland Euro Door Mounting Clip
Removing Korapop 225 Squeeze-Out from Door Installation
Installed Habitat Door
Installed Habitat Door
Wabi-sabi Overland 