Truck Update 12/2/18

  • Laid out passenger side countertop
  • Received self-adhesive carpet
  • Sanded and painted passenger side cabinet doors
  • Fabricated passenger side bed wall table mount
  • Sanded passenger cabinet/switch box assembly and headboard/cubby assembly in preparation for second coat of paint
  • Installed passenger side bed wall table mount
  • Applied first coat of paint to forward passenger side bed wall
  • Filled screw holes on back side of bed wall
  • Reinstalled engine access cover in cab
  • Applied final coat of paint on upper forward passenger side bed wall
  • Applied final coat of paint to
    • Passenger cabinet/switch box assembly
    • Headboard/cubby assembly
  • Prepped, bonded, and screwed rear over bed cabinet into habitat
  • Drilled hole for wire passthrough into breaker panel
  • Designed awning mount
  • Started evaluating door entry handle position
  • Ordered
    • Padded liners for pantry storage
    • Hardware for awning mount
  • Machines spacers for cabinet door latches
  • Machined mounting plates for awning
  • Milled down combination lock strike plates
  • Installed
    • Doors in passenger side overhead cabinet
    • Latches on passenger side overhead cabinet
  • Removed and epoxy installed all hardware on passenger side overhead cabinet
  • Applied self-adhesive carpet to inside of kitchen pantry
  • Installed strike plates on pantry combination locks with lock nuts
  • Fabricated
    • Passenger side exterior wall table mount rail
    • Drill guide for awning install
  • Rough cut oak for passenger side table top
Advertisements