Truck Update 11/21/18

  • Cut shelves for pantry from 12mm plywood
  • Trimmed edges of pantry shelves with 3/4″ poplar
  • Measured and laid out shelf spacing
  • Bonded and screwed shelf ledges to pantry sides
  • Bonded edge trim to bathroom wall
  • Clearanced and trimmed pantry components
  • Dry assembled kitchen pantry and bathroom wall
  • Fabricated lower shelf and support structure for pantry
  • Bonded in all pantry shelves
  • Made and installed trim around top of pantry
  • Countersunk holes in cabinet face
  • Cleaned and deburred all screw holes
  • Filled all exposed screw holes
  • Sanded filling and paint prepped kitchen pantry
  • Received cabinet door latches
  • Purchased lumber to finish pantry
  • Applied first coat of paint to pantry
  • Applied first coat of pain on lumber to finish pantry
  • Sanded first coat of paint on pantry
  • Sprayed on second and third coats of pain to pantry
  • Sanded pantry doors
  • Started designing storage behind bed headboard
  • Cut and painted shims for spacing pantry from upper kitchen cabinet
  • Cut latch opening in pantry door faces
  • Applied second coat of paint on lumber to finish pantry
  • Started designing passenger side overhead cabinet
  • Painted pantry doors
  • Bonded 1/4″ spacers to upper kitchen cabinet
  • Purchased lumber for storage behind bed headboard and passenger side overhead cabinet
  • Applied final coat of paint on pantry doors
Advertisements