Truck Update: 10/28/18

  • Designed under countertop riser
  • Cut, fitted, and sanded wood for under countertop riser
  • Received candidate sink gray water tank and kitchen goods tie down options
  • Assembled, bonded, and screwed under countertop riser
  • Cut 5mm plywood for back of kitchen cabinet
  • Cut 3/4″ plywood for under stove support
  • Final assembled under counter riser
  • Designed under counter slide out/cutting board
  • Fabricated structure for under counter slide out/cutting board
  • Created outlet cutout in face of cabinet
  • Routed edge of scrap oak
  • Bonded scrap oak for slide out/cutting board
  • Test fit sink, faucet, and stove
  • Test fit sound deadening floor mat
  • Trimmed and marked additional areas to trim in sound deadening floor mat
  • Cut away unneeded steel brackets on cab floor
  • Made templates for wool felt for:
    • Engine access door
    • Glove box
    • Top of dash
  • Purchased cabinet material
  • Received battery cables
  • Trimmed and cut away extra sound deadening floor mat material
  • Unclamped bonded oak and cut to slide out/cutting board final size
  • Disposed of old driver side seat
  • Continued fit checking components to refine interior layout
  • Dry assembled slide out/cutting board
  • Painted and urethaned slide out/cutting board
  • Started design work on kitchen cabinet to floor frame
  • Cut and trimmed felt insulation for cab
  • Fit checked sound deadening floor mats and marked additional areas to trim
  • Fit checked felt
  • Removed cab door panels
  • Removed glove box
  • Removed rear engine access cover
  • Purchased cab insulation and kitchen cabinet supplies
  • Covered ash tray indentation in engine access cover
  • Final assembled slide out/cutting board
  • Filled wood grain cracks in edge of countertop
  • Opened up kitchen outlet cutout
  • Researched GFCI wiring for invertors
  • Painted engine access cover texture black
  • Trimmed away marked sound deadening floor mat material
  • Disassembled and cleaned glove box
  • Bonded felt to engine access cover and glove box door
  • Drilled mounting holes and test mounted alcohol stove
  • Applied sound deadening mat to back side of glove box
Advertisements